1、在github中拉先Fork项目DockerTarBuilder，如下图：
2、进行镜像的在线打包
3、下载镜像
4、提前通过mkdir将本地映射目录创建，运行Nacos Docker容器,具体命令如下：
mkdir -p /mydata/nacos/logs/
mkdir -p /mydata/nacos/conf/
docker run -d \
--name nacos \
-p 8848:8848 \
-p 9848:9848 \
-p 9849:9849 \
--privileged=true \
-e JVM_XMS=256m \
-e JVM_XMX=256m \
-e MODE=standalone \
-v /mydata/nacos/logs/:/home/nacos/logs \
-v /mydata/nacos/conf/:/home/nacos/conf \
--restart=always \
nacos/nacos-server:v2.4.1
5、将nacos的配置文件放在/mydata/nacos/conf/中：
application.properties：
#
# Copyright 1999-2021 Alibaba Group Holding Ltd.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
#*************** Spring Boot Related Configurations ***************#
### Default web context path:
server.servlet.contextPath=/nacos
### Include message field
server.error.include-message=ALWAYS
### Default web server port:
server.port=8848
#*************** Network Related Configurations ***************#
### If prefer hostname over ip for Nacos server addresses in cluster.conf:
# nacos.inetutils.prefer-hostname-over-ip=false
### Specify local server's IP:
# nacos.inetutils.ip-address=
#*************** Config Module Related Configurations ***************#
### If use MySQL as datasource:
### Deprecated configuration property, it is recommended to use `spring.sql.init.platform` replaced.
spring.datasource.platform=mysql
# spring.sql.init.platform=mysql
### Count of DB:
db.num=1
### Connect URL of DB:
db.url.0=jdbc:mysql://127.0.0.1:3306/nacos?characterEncoding=utf8&connectTimeout=1000&socketTimeout=3000&autoReconnect=true&useUnicode=true&useSSL=false&serverTimezone=UTC
db.user.0=nacos
db.password.0=nacos
### Connection pool configuration: hikariCP
db.pool.config.connectionTimeout=30000
db.pool.config.validationTimeout=10000
db.pool.config.maximumPoolSize=20
db.pool.config.minimumIdle=2
### the maximum retry times for push
nacos.config.push.maxRetryTime=50
#*************** Naming Module Related Configurations ***************#
### If enable data warmup. If set to false, the server would accept request without local data preparation:
# nacos.naming.data.warmup=true
### If enable the instance auto expiration, kind like of health check of instance:
# nacos.naming.expireInstance=true
### Add in 2.0.0
### The interval to clean empty service, unit: milliseconds.
# nacos.naming.clean.empty-service.interval=60000
### The expired time to clean empty service, unit: milliseconds.
# nacos.naming.clean.empty-service.expired-time=60000
### The interval to clean expired metadata, unit: milliseconds.
# nacos.naming.clean.expired-metadata.interval=5000
### The expired time to clean metadata, unit: milliseconds.
# nacos.naming.clean.expired-metadata.expired-time=60000
### The delay time before push task to execute from service changed, unit: milliseconds.
# nacos.naming.push.pushTaskDelay=500
### The timeout for push task execute, unit: milliseconds.
# nacos.naming.push.pushTaskTimeout=5000
### The delay time for retrying failed push task, unit: milliseconds.
# nacos.naming.push.pushTaskRetryDelay=1000
### Since 2.0.3
### The expired time for inactive client, unit: milliseconds.
# nacos.naming.client.expired.time=180000
#*************** CMDB Module Related Configurations ***************#
### The interval to dump external CMDB in seconds:
# nacos.cmdb.dumpTaskInterval=3600
### The interval of polling data change event in seconds:
# nacos.cmdb.eventTaskInterval=10
### The interval of loading labels in seconds:
# nacos.cmdb.labelTaskInterval=300
### If turn on data loading task:
# nacos.cmdb.loadDataAtStart=false
#***********Metrics for tomcat **************************#
server.tomcat.mbeanregistry.enabled=true
#***********Expose prometheus and health **************************#
#management.endpoints.web.exposure.include=prometheus,health
### Metrics for elastic search
management.metrics.export.elastic.enabled=false
#management.metrics.export.elastic.host=http://localhost:9200
### Metrics for influx
management.metrics.export.influx.enabled=false
#management.metrics.export.influx.db=springboot
#management.metrics.export.influx.uri=http://localhost:8086
#management.metrics.export.influx.auto-create-db=true
#management.metrics.export.influx.consistency=one
#management.metrics.export.influx.compressed=true
#*************** Access Log Related Configurations ***************#
### If turn on the access log:
server.tomcat.accesslog.enabled=true
### file name pattern, one file per hour
server.tomcat.accesslog.rotate=true
server.tomcat.accesslog.file-date-format=.yyyy-MM-dd-HH
### The access log pattern:
server.tomcat.accesslog.pattern=%h %l %u %t "%r" %s %b %D %{User-Agent}i %{Request-Source}i
### The directory of access log:
server.tomcat.basedir=file:.
#*************** Access Control Related Configurations ***************#
### If enable spring security, this option is deprecated in 1.2.0:
#spring.security.enabled=false
### The ignore urls of auth
nacos.security.ignore.urls=/,/error,/**/*.css,/**/*.js,/**/*.html,/**/*.map,/**/*.svg,/**/*.png,/**/*.ico,/console-ui/public/**,/v1/auth/**,/v1/console/health/**,/actuator/**,/v1/console/server/**
### The auth system to use, currently only 'nacos' and 'ldap' is supported:
nacos.core.auth.system.type=nacos
### If turn on auth system:
nacos.core.auth.enabled=false
### Turn on/off caching of auth information. By turning on this switch, the update of auth information would have a 15 seconds delay.
nacos.core.auth.caching.enabled=true
### Since 1.4.1, Turn on/off white auth for user-agent: nacos-server, only for upgrade from old version.
nacos.core.auth.enable.userAgentAuthWhite=false
### Since 1.4.1, worked when nacos.core.auth.enabled=true and nacos.core.auth.enable.userAgentAuthWhite=false.
### The two properties is the white list for auth and used by identity the request from other server.
nacos.core.auth.server.identity.key=
nacos.core.auth.server.identity.value=
### worked when nacos.core.auth.system.type=nacos
### The token expiration in seconds:
nacos.core.auth.plugin.nacos.token.cache.enable=false
nacos.core.auth.plugin.nacos.token.expire.seconds=18000
### The default token (Base64 String):
nacos.core.auth.plugin.nacos.token.secret.key=
### worked when nacos.core.auth.system.type=ldap，{0} is Placeholder,replace login username
#nacos.core.auth.ldap.url=ldap://localhost:389
#nacos.core.auth.ldap.basedc=dc=example,dc=org
#nacos.core.auth.ldap.userDn=cn=admin,${nacos.core.auth.ldap.basedc}
#nacos.core.auth.ldap.password=admin
#nacos.core.auth.ldap.userdn=cn={0},dc=example,dc=org
#nacos.core.auth.ldap.filter.prefix=uid
#nacos.core.auth.ldap.case.sensitive=true
#nacos.core.auth.ldap.ignore.partial.result.exception=false
#*************** Control Plugin Related Configurations ***************#
# plugin type
#nacos.plugin.control.manager.type=nacos
# local control rule storage dir, default ${nacos.home}/data/connection and ${nacos.home}/data/tps
#nacos.plugin.control.rule.local.basedir=${nacos.home}
# external control rule storage type, if exist
#nacos.plugin.control.rule.external.storage=
#*************** Config Change Plugin Related Configurations ***************#
# webhook
#nacos.core.config.plugin.webhook.enabled=false
# It is recommended to use EB https://help.aliyun.com/document_detail/413974.html
#nacos.core.config.plugin.webhook.url=http://localhost:8080/webhook/send?token=***
# The content push max capacity ,byte
#nacos.core.config.plugin.webhook.contentMaxCapacity=102400
# whitelist
#nacos.core.config.plugin.whitelist.enabled=false
# The import file suffixs
#nacos.core.config.plugin.whitelist.suffixs=xml,text,properties,yaml,html
# fileformatcheck,which validate the import file of type and content
#nacos.core.config.plugin.fileformatcheck.enabled=false
#*************** Istio Related Configurations ***************#
### If turn on the MCP server:
nacos.istio.mcp.server.enabled=false
#*************** Core Related Configurations ***************#
### set the WorkerID manually
# nacos.core.snowflake.worker-id=
### Member-MetaData
# nacos.core.member.meta.site=
# nacos.core.member.meta.adweight=
# nacos.core.member.meta.weight=
### MemberLookup
### Addressing pattern category, If set, the priority is highest
# nacos.core.member.lookup.type=[file,address-server]
## Set the cluster list with a configuration file or command-line argument
# nacos.member.list=192.168.16.101:8847?raft_port=8807,192.168.16.101?raft_port=8808,192.168.16.101:8849?raft_port=8809
## for AddressServerMemberLookup
# Maximum number of retries to query the address server upon initialization
# nacos.core.address-server.retry=5
## Server domain name address of [address-server] mode
# address.server.domain=jmenv.tbsite.net
## Server port of [address-server] mode
# address.server.port=8080
## Request address of [address-server] mode
# address.server.url=/nacos/serverlist
#*************** JRaft Related Configurations ***************#
### Sets the Raft cluster election timeout, default value is 5 second
# nacos.core.protocol.raft.data.election_timeout_ms=5000
### Sets the amount of time the Raft snapshot will execute periodically, default is 30 minute
# nacos.core.protocol.raft.data.snapshot_interval_secs=30
### raft internal worker threads
# nacos.core.protocol.raft.data.core_thread_num=8
### Number of threads required for raft business request processing
# nacos.core.protocol.raft.data.cli_service_thread_num=4
### raft linear read strategy. Safe linear reads are used by default, that is, the Leader tenure is confirmed by heartbeat
# nacos.core.protocol.raft.data.read_index_type=ReadOnlySafe
### rpc request timeout, default 5 seconds
# nacos.core.protocol.raft.data.rpc_request_timeout_ms=5000
#*************** Distro Related Configurations ***************#
### Distro data sync delay time, when sync task delayed, task will be merged for same data key. Default 1 second.
# nacos.core.protocol.distro.data.sync.delayMs=1000
### Distro data sync timeout for one sync data, default 3 seconds.
# nacos.core.protocol.distro.data.sync.timeoutMs=3000
### Distro data sync retry delay time when sync data failed or timeout, same behavior with delayMs, default 3 seconds.
# nacos.core.protocol.distro.data.sync.retryDelayMs=3000
### Distro data verify interval time, verify synced data whether expired for a interval. Default 5 seconds.
# nacos.core.protocol.distro.data.verify.intervalMs=5000
### Distro data verify timeout for one verify, default 3 seconds.
# nacos.core.protocol.distro.data.verify.timeoutMs=3000
### Distro data load retry delay when load snapshot data failed, default 30 seconds.
# nacos.core.protocol.distro.data.load.retryDelayMs=30000
### enable to support prometheus service discovery
#nacos.prometheus.metrics.enabled=true
### Since 2.3
#*************** Grpc Configurations ***************#
## sdk grpc(between nacos server and client) configuration
## Sets the maximum message size allowed to be received on the server.
#nacos.remote.server.grpc.sdk.max-inbound-message-size=10485760
## Sets the time(milliseconds) without read activity before sending a keepalive ping. The typical default is two hours.
#nacos.remote.server.grpc.sdk.keep-alive-time=7200000
## Sets a time(milliseconds) waiting for read activity after sending a keepalive ping. Defaults to 20 seconds.
#nacos.remote.server.grpc.sdk.keep-alive-timeout=20000
## Sets a time(milliseconds) that specify the most aggressive keep-alive time clients are permitted to configure. The typical default is 5 minutes
#nacos.remote.server.grpc.sdk.permit-keep-alive-time=300000
## cluster grpc(inside the nacos server) configuration
#nacos.remote.server.grpc.cluster.max-inbound-message-size=10485760
## Sets the time(milliseconds) without read activity before sending a keepalive ping. The typical default is two hours.
#nacos.remote.server.grpc.cluster.keep-alive-time=7200000
## Sets a time(milliseconds) waiting for read activity after sending a keepalive ping. Defaults to 20 seconds.
#nacos.remote.server.grpc.cluster.keep-alive-timeout=20000
## Sets a time(milliseconds) that specify the most aggressive keep-alive time clients are permitted to configure. The typical default is 5 minutes
#nacos.remote.server.grpc.cluster.permit-keep-alive-time=300000
## open nacos default console ui
#nacos.console.ui.enabled=truenacos-logback.xml：
<?xml version="1.0" encoding="UTF-8"?>
<!--
~ Copyright 1999-2018 Alibaba Group Holding Ltd.
~
~ Licensed under the Apache License, Version 2.0 (the "License");
~ you may not use this file except in compliance with the License.
~ You may obtain a copy of the License at
~
~ http://www.apache.org/licenses/LICENSE-2.0
~
~ Unless required by applicable law or agreed to in writing, software
~ distributed under the License is distributed on an "AS IS" BASIS,
~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
~ See the License for the specific language governing permissions and
~ limitations under the License.
-->
<configuration scan="true" scanPeriod="10 seconds">
<springProperty scope="context" name="logPath" source="nacos.logs.path" defaultValue="${nacos.home}/logs"/>
<property name="LOG_HOME" value="${logPath}"/>
<appender name="cmdb-main"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${nacos.home}/logs/cmdb-main.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${nacos.home}/logs/cmdb-main.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="CONSOLE" class="ch.qos.logback.core.ConsoleAppender">
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="naming-server"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/naming-server.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/naming-server.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>1GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="async-naming-server" class="ch.qos.logback.classic.AsyncAppender">
<discardingThreshold>0</discardingThreshold>
<queueSize>1024</queueSize>
<neverBlock>true</neverBlock>
<appender-ref ref="naming-server"/>
</appender>
<appender name="naming-raft"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/naming-raft.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/naming-raft.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>1GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>3GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="async-naming-raft" class="ch.qos.logback.classic.AsyncAppender">
<discardingThreshold>0</discardingThreshold>
<queueSize>1024</queueSize>
<neverBlock>true</neverBlock>
<appender-ref ref="naming-raft"/>
</appender>
<appender name="naming-distro"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/naming-distro.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/naming-distro.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>1GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>3GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="async-naming-distro" class="ch.qos.logback.classic.AsyncAppender">
<discardingThreshold>0</discardingThreshold>
<queueSize>1024</queueSize>
<neverBlock>true</neverBlock>
<appender-ref ref="naming-distro"/>
</appender>
<appender name="naming-event"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/naming-event.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/naming-event.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>1GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>3GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="async-naming-event" class="ch.qos.logback.classic.AsyncAppender">
<discardingThreshold>0</discardingThreshold>
<queueSize>1024</queueSize>
<neverBlock>true</neverBlock>
<appender-ref ref="naming-event"/>
</appender>
<appender name="naming-push"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/naming-push.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/naming-push.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>1GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>3GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="naming-rt"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/naming-rt.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/naming-rt.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>1GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>3GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%msg%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="naming-performance"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/naming-performance.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/naming-performance.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>1GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>3GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<!--config module logback config-->
<appender name="dumpFile"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/config-dump.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/config-dump.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="pullFile"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/config-pull.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/config-pull.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>20MB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>128MB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="fatalFile"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/config-fatal.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/config-fatal.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>20MB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>128MB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="memoryFile"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/config-memory.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/config-memory.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>20MB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>128MB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="pullCheckFile"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/config-pull-check.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/config-pull-check.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>1GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>3GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%msg%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="clientLog"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/config-client-request.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/config-client-request.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date|%msg%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="traceLog"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/config-trace.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/config-trace.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date|%msg%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="notifyLog"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/config-notify.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/config-notify.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>1GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>3GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="startLog"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/config-server.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/config-server.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>50MB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>512MB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="rootFile"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/nacos.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/nacos.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>50MB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>512MB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="nacos-address"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/nacos-address.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/nacos-address.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="istio-main"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/istio-main.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/istio-main.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="core-auth"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/core-auth.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/core-auth.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="protocol-raft"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/protocol-raft.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/protocol-raft.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="protocol-distro"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/protocol-distro.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/protocol-distro.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="nacos-cluster"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/nacos-cluster.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/nacos-cluster.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="alipay-jraft"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/alipay-jraft.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/alipay-jraft.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<!--TPS control -->
<appender name="tps-control"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/tps-control.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/tps-control.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="tps-control-digest"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/tps-control-digest.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/tps-control-digest.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="tps-control-detail"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/tps-control-detail.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/tps-control-detail.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="remote"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/remote.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/remote.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="remote-digest"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/remote-digest.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/remote-digest.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="remote-push"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/remote-push.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/remote-push.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<appender name="nacos-persistence"
class="ch.qos.logback.core.rolling.RollingFileAppender">
<file>${LOG_HOME}/nacos-persistence.log</file>
<append>true</append>
<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
<fileNamePattern>${LOG_HOME}/nacos-persistence.log.%d{yyyy-MM-dd}.%i</fileNamePattern>
<maxFileSize>2GB</maxFileSize>
<maxHistory>7</maxHistory>
<totalSizeCap>7GB</totalSizeCap>
<cleanHistoryOnStart>true</cleanHistoryOnStart>
</rollingPolicy>
<encoder>
<Pattern>%date %level %msg%n%n</Pattern>
<charset>UTF-8</charset>
</encoder>
</appender>
<logger name="com.alibaba.nacos.address.main" additivity="false">
<level value="INFO"/>
<appender-ref ref="nacos-address"/>
</logger>
<logger name="com.alibaba.nacos.cmdb.main" additivity="false">
<level value="INFO"/>
<appender-ref ref="cmdb-main"/>
</logger>
<logger name="com.alibaba.nacos.core.remote" additivity="false">
<level value="DEBUG"/>
<appender-ref ref="remote"/>
</logger>
<logger name="com.alibaba.nacos.core.remote.push" additivity="false">
<level value="DEBUG"/>
<appender-ref ref="remote-push"/>
</logger>
<logger name="com.alibaba.nacos.core.remote.digest" additivity="false">
<level value="DEBUG"/>
<appender-ref ref="remote-digest"/>
</logger>
<!-- TPS Control-->
<logger name="com.alibaba.nacos.core.remote.control.digest" additivity="false">
<level value="DEBUG"/>
<appender-ref ref="tps-control-digest"/>
</logger>
<logger name="com.alibaba.nacos.core.remote.control.detail" additivity="false">
<level value="DEBUG"/>
<appender-ref ref="tps-control-detail"/>
</logger>
<logger name="com.alibaba.nacos.core.remote.control" additivity="false">
<level value="DEBUG"/>
<appender-ref ref="tps-control"/>
</logger>
<logger name="com.alibaba.nacos.naming.main" additivity="false">
<level value="INFO"/>
<appender-ref ref="async-naming-server"/>
</logger>
<logger name="com.alibaba.nacos.naming.raft" additivity="false">
<level value="INFO"/>
<appender-ref ref="async-naming-raft"/>
</logger>
<logger name="com.alibaba.nacos.naming.distro" additivity="false">
<level value="INFO"/>
<appender-ref ref="async-naming-distro"/>
</logger>
<logger name="com.alibaba.nacos.naming.event" additivity="false">
<level value="INFO"/>
<appender-ref ref="async-naming-event"/>
</logger>
<logger name="com.alibaba.nacos.naming.push" additivity="false">
<level value="INFO"/>
<appender-ref ref="naming-push"/>
</logger>
<logger name="com.alibaba.nacos.naming.rt" additivity="false">
<level value="INFO"/>
<appender-ref ref="naming-rt"/>
</logger>
<logger name="com.alibaba.nacos.naming.performance" additivity="false">
<level value="INFO"/>
<appender-ref ref="naming-performance"/>
</logger>
<logger name="com.alibaba.nacos.config.dumpLog" additivity="false">
<level value="INFO"/>
<appender-ref ref="dumpFile"/>
</logger>
<logger name="com.alibaba.nacos.config.pullLog" additivity="false">
<level value="INFO"/>
<appender-ref ref="pullFile"/>
</logger>
<logger name="com.alibaba.nacos.config.pullCheckLog" additivity="false">
<level value="INFO"/>
<appender-ref ref="pullCheckFile"/>
</logger>
<logger name="com.alibaba.nacos.config.fatal" additivity="false">
<level value="INFO"/>
<appender-ref ref="fatalFile"/>
</logger>
<logger name="com.alibaba.nacos.config.monitorLog" additivity="false">
<level value="INFO"/>
<appender-ref ref="memoryFile"/>
</logger>
<logger name="com.alibaba.nacos.config.clientLog" additivity="false">
<level value="info"/>
<appender-ref ref="clientLog"/>
</logger>
<logger name="com.alibaba.nacos.config.notifyLog" additivity="false">
<level value="INFO"/>
<appender-ref ref="notifyLog"/>
</logger>
<logger name="com.alibaba.nacos.config.traceLog" additivity="false">
<level value="info"/>
<appender-ref ref="traceLog"/>
</logger>
<logger name="com.alibaba.nacos.config.startLog" additivity="false">
<level value="INFO"/>
<appender-ref ref="startLog"/>
</logger>
<logger name="com.alibaba.nacos.istio.main" additivity="false">
<level value="DEBUG"/>
<appender-ref ref="istio-main"/>
</logger>
<logger name="com.alibaba.nacos.core.auth" additivity="false">
<level value="DEBUG"/>
<appender-ref ref="core-auth"/>
</logger>
<logger name="com.alibaba.nacos.core.protocol.raft" additivity="false">
<level value="INFO"/>
<appender-ref ref="protocol-raft"/>
</logger>
<logger name="com.alipay.sofa.jraft" additivity="false">
<level value="INFO"/>
<appender-ref ref="alipay-jraft"/>
</logger>
<logger name="com.alibaba.nacos.core.protocol.distro" additivity="false">
<level value="INFO"/>
<appender-ref ref="protocol-distro"/>
</logger>
<logger name="com.alibaba.nacos.core.cluster" additivity="false">
<level value="INFO"/>
<appender-ref ref="nacos-cluster"/>
</logger>
<logger name="com.alibaba.nacos.persistence" additivity="false">
<level value="INFO"/>
<appender-ref ref="nacos-persistence"/>
</logger>
<springProfile name="standalone">
<logger name="org.springframework">
<appender-ref ref="CONSOLE"/>
<level value="INFO"/>
</logger>
<logger name="org.apache.catalina.startup.DigesterFactory">
<appender-ref ref="CONSOLE"/>
<level value="INFO"/>
</logger>
<logger name="org.apache.catalina.util.LifecycleBase">
<appender-ref ref="CONSOLE"/>
<level value="ERROR"/>
</logger>
<logger name="org.apache.coyote.http11.Http11NioProtocol">
<appender-ref ref="CONSOLE"/>
<level value="WARN"/>
</logger>
<logger name="org.apache.tomcat.util.net.NioSelectorPool">
<appender-ref ref="CONSOLE"/>
<level value="WARN"/>
</logger>
</springProfile>
<logger name="com.alibaba.nacos.core.listener.StartingApplicationListener">
<appender-ref ref="CONSOLE"/>
<level value="INFO"/>
</logger>
<logger name="com.alibaba.nacos.common.notify.NotifyCenter">
<appender-ref ref="CONSOLE"/>
<level value="INFO"/>
</logger>
<logger name="com.alibaba.nacos.sys.file.WatchFileCenter">
<appender-ref ref="CONSOLE"/>
<level value="INFO"/>
</logger>
<logger name="com.alibaba.nacos.common.executor.ThreadPoolManager">
<appender-ref ref="CONSOLE"/>
<level value="INFO"/>
</logger>
<root>
<level value="INFO"/>
<appender-ref ref="rootFile"/>
</root>
</configuration>6、查看nacos容器是否正常运行，具体命令如下：
docker ps -a | grep Up7、具体结果如下图所示：
