一、前期系统环境准备
1、关闭防火墙与selinux
[root@k8s-master ~]# systemctl stop firewalld [root@k8s-master ~]# systemctl disable firewalld Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service. Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service. [root@k8s-master ~]# setenforce 0 [root@k8s-master ~]# sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/sysconfig/selinux [root@k8s-master ~]# sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/selinux/config
2、配置主机映射
[root@k8s-master ~]# vim /etc/hosts 10.0.0.11 k8s-master 10.0.0.22 k8s-node01 10.0.0.33 k8s-node02 [root@k8s-master ~]# scp /etc/hosts root@10.0.0.22:/etc/hosts [root@k8s-master ~]# scp /etc/hosts root@10.0.0.22:/etc/hosts
3、测试映射效果
[root@k8s-master ~]# ping k8s-node01 PING k8s-node01 (10.0.0.22) 56(84) bytes of data. 64 bytes from k8s-node01 (10.0.0.22): icmp_seq=1 ttl=64 time=0.346 ms 64 bytes from k8s-node01 (10.0.0.22): icmp_seq=2 ttl=64 time=0.265 ms ^C --- k8s-node01 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1000ms rtt min/avg/max/mdev = 0.265/0.305/0.346/0.044 ms [root@k8s-master ~]# ping k8s-node02 PING k8s-node02 (10.0.0.33) 56(84) bytes of data. 64 bytes from k8s-node02 (10.0.0.33): icmp_seq=1 ttl=64 time=0.306 ms 64 bytes from k8s-node02 (10.0.0.33): icmp_seq=2 ttl=64 time=0.193 ms ^C --- k8s-node02 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1000ms
4、配置主机间免密登录
[root@k8s-master ~]# ssh-keygen Generating public/private rsa key pair. Enter file in which to save the key (/root/.ssh/id_rsa): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /root/.ssh/id_rsa. Your public key has been saved in /root/.ssh/id_rsa.pub. The key fingerprint is: SHA256:pJNP7Nx9pi00P7w8nBNECxdAyHyKPnc6UNaLdXYs6b8 root@k8s-master The key's randomart image is: +---[RSA 2048]----+ | o oo... | | + o o | | .. + + + | | =. + o B o| | +.So o * o | | *+.o.= o | | ++.+.=o+ | | o .*O .| | ...+E.| +----[SHA256]-----+ [root@k8s-master ~]# ssh-copy-id root@10.0.0.22 /usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub" /usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed /usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys root@10.0.0.22's password: Number of key(s) added: 1 Now try logging into the machine, with: "ssh 'root@10.0.0.22'" and check to make sure that only the key(s) you wanted were added. [root@k8s-master ~]# ssh-copy-id root@10.0.0.33
5、配置yum源
[root@k8s-master ~]# cd /etc/yum.repos.d/ # docker软件源 [root@k8s-master yum.repos.d]# vim docker-ce.repo [docker-ce-stable] name=Docker CE Stable - $basearch baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/$releasever/$basearch/stable enabled=1 gpgcheck=1 gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg [docker-ce-stable-debuginfo] name=Docker CE Stable - Debuginfo $basearch baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/$releasever/debug-$basearch/stable enabled=0 gpgcheck=1 gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg [docker-ce-stable-source] name=Docker CE Stable - Sources baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/$releasever/source/stable enabled=0 gpgcheck=1 gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg [docker-ce-test] name=Docker CE Test - $basearch baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/$releasever/$basearch/test enabled=0 gpgcheck=1 gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg [docker-ce-test-debuginfo] name=Docker CE Test - Debuginfo $basearch baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/$releasever/debug-$basearch/test enabled=0 gpgcheck=1 gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg [docker-ce-test-source] name=Docker CE Test - Sources baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/$releasever/source/test enabled=0 gpgcheck=1 gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg [docker-ce-nightly] name=Docker CE Nightly - $basearch baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/$releasever/$basearch/nightly enabled=0 gpgcheck=1 gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg [docker-ce-nightly-debuginfo] name=Docker CE Nightly - Debuginfo $basearch baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/$releasever/debug-$basearch/nightly enabled=0 gpgcheck=1 gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg [docker-ce-nightly-source] name=Docker CE Nightly - Sources baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/$releasever/source/nightly enabled=0 gpgcheck=1 gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg # K8S软件源 [root@k8s-master yum.repos.d]# vim kubernetes.repo [kubernetes] name=Kubernetes baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/ enabled=1 gpgcheck=0 repo_gpgcheck=0 gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg [root@k8s-master yum.repos.d]# yum clean all && yum makecache [root@k8s-master yum.repos.d]# scp docker-ce.repo root@10.0.0.22:/etc/yum.repos.d/ docker-ce.repo 100% 2073 1.9MB/s 00:00 [root@k8s-master yum.repos.d]# scp kubernetes.repo root@10.0.0.22:/etc/yum.repos.d/ kubernetes.repo 100% 211 281.2KB/s 00:00 [root@k8s-master yum.repos.d]# scp docker-ce.repo root@10.0.0.33:/etc/yum.repos.d/ docker-ce.repo 100% 2073 1.9MB/s 00:00 [root@k8s-master yum.repos.d]# scp kubernetes.repo root@10.0.0.33:/etc/yum.repos.d/ kubernetes.repo 100% 211 281.2KB/s 00:00
6、安装必备工具
[root@k8s-master ~]# yum install wget jq psmisc vim net-tools telnet yum-utils device-mapper-persistent-data lvm2 git -y
7、关闭swap 分区
[root@k8s-master ~]# swapoff -a && sysctl -w vm.swappiness=0 vm.swappiness = 0 [root@k8s-master ~]# sed -ri '/^[^#]*swap/s@^@#@' /etc/fstab
8、同步时间
[root@k8s-master ~]# yum -y install ntpdate [root@k8s-master ~]# ntpdate time2.aliyun.com 4 Sep 10:08:59 ntpdate[1897]: adjust time server 203.107.6.88 offset 0.007780 sec [root@k8s-master ~]# which ntpdate /usr/sbin/ntpdate [root@k8s-master ~]# crontab -e * 5 * * * /usr/sbin/ntpdate time2.aliyun.com
9、配置 limit
# 单个进程可以打开的⽂件数量将被限制为 65535 [root@k8s-master ~]# ulimit -SHn 65535 [root@k8s-master ~]# vim /etc/security/limits.conf # 末尾添加如下内容 * soft nofile 65536 * hard nofile 131072 * soft nproc 65535 * hard nproc 655350 * soft memlock unlimited * hard memlock unlimited
10、安装 k8s ⾼可⽤性 Git 仓库并重启
# 在 /root/ ⽬录下克隆⼀个名为 k8s-ha-install.git 的 Git 仓库 [root@k8s-master ~]# git clone https://gitee.com/dukuan/k8s-ha-install.git 正克隆到 'k8s-ha-install'... remote: Enumerating objects: 920, done. remote: Counting objects: 100% (8/8), done. remote: Compressing objects: 100% (6/6), done. remote: Total 920 (delta 1), reused 0 (delta 0), pack-reused 912 接收对象中: 100% (920/920), 19.74 MiB | 1.51 MiB/s, done. 处理 delta 中: 100% (388/388), done. [root@k8s-master ~]# cd k8s-ha-install/ [root@k8s-master k8s-ha-install]# ls calico.yaml krm.yaml LICENSE metrics-server-0.3.7 metrics-server-3.6.1 README.md [root@k8s-master k8s-ha-install]# reboot
二、配置内核模块
1、配置ipvs模块
[root@k8s-master ~]# yum install ipvsadm ipset sysstat conntrack libseccomp -y # 使⽤ modprobe 命令加载内核模块，核⼼ IPVS 模块。 [root@k8s-master ~]# modprobe -- ip_vs # IPVS 负载均衡算法 rr。 [root@k8s-master ~]# modprobe -- ip_vs_rr # IPVS 负载均衡算法 wrr [root@k8s-master ~]# modprobe -- ip_vs_wrr # ⽤于源端负载均衡的模块 [root@k8s-master ~]# modprobe -- ip_vs_sh # ⽤于⽹络流量过滤和跟踪的模块 [root@k8s-master ~]# modprobe -- nf_conntrack # 在系统启动时加载下列 IPVS 和相关功能所需的模块 [root@k8s-master ~]# find / -name "ipvs.config" [root@k8s-master ~]# vim /etc/modules-load.d/ipvs.config ip_vs # 负载均衡模块 ip_vs_lc # ⽤于实现基于连接数量的负载均衡算法 ip_vs_wlc # ⽤于实现带权重的最少连接算法的模块 ip_vs_rr # 负载均衡rr算法模块 ip_vs_wrr # 负载均衡wrr算法模块 ip_vs_lblc # 负载均衡算法，它结合了最少连接（LC）算法和基于偏置的轮询（Round Robin with Bias）算法 ip_vs_lblcr # ⽤于实现基于链路层拥塞状况的最少连接负载调度算法的模块 ip_vs_dh # ⽤于实现基于散列（Hashing）的负载均衡算法的模块 ip_vs_sh # ⽤于源端负载均衡的模块 ip_vs_fo # ⽤于实现基于本地服务的负载均衡算法的模块 ip_vs_nq # ⽤于实现NQ算法的模块 ip_vs_sed # ⽤于实现随机早期检测（Random Early Detection）算法的模块 ip_vs_ftp # ⽤于实现FTP服务的负载均衡模块 ip_vs_sh nf_conntrack # ⽤于跟踪⽹络连接的状态的模块 ip_tables # ⽤于管理防护墙的机制 ip_set # ⽤于创建和管理IP集合的模块 xt_set # ⽤于处理IP数据包集合的模块，提供了与iptables等⽹络⼯具的接⼝ ipt_set # ⽤于处理iptables规则集合的模块 ipt_rpfilter # ⽤于实现路由反向路径过滤的模块 ipt_REJECT # iptables模块之⼀，⽤于将不符合规则的数据包拒绝，并返回特定的错误码 ipip # ⽤于实现IP隧道功能的模块，使得数据可以在两个⽹络之间进⾏传输 [root@k8s-master ~]# sysctl --system * Applying /usr/lib/sysctl.d/00-system.conf ... * Applying /usr/lib/sysctl.d/10-default-yama-scope.conf ... kernel.yama.ptrace_scope = 0 * Applying /usr/lib/sysctl.d/50-default.conf ... kernel.sysrq = 16 kernel.core_uses_pid = 1 net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.default.accept_source_route = 0 net.ipv4.conf.all.accept_source_route = 0 net.ipv4.conf.default.promote_secondaries = 1 net.ipv4.conf.all.promote_secondaries = 1 fs.protected_hardlinks = 1 fs.protected_symlinks = 1 * Applying /etc/sysctl.d/99-sysctl.conf ... * Applying /etc/sysctl.conf ... # 开机⾃启systemd默认提供的⽹络管理服务 [root@k8s-master ~]# systemctl enable systemd-modules-load.service [root@k8s-master ~]# systemctl start systemd-modules-load.service # 查看已写⼊加载的模块 [root@k8s-master ~]# lsmod | grep -e ip_vs -e nf_conntrack ip_vs_sh 12688 0 ip_vs_wrr 12697 0 ip_vs_rr 12600 0 ip_vs 141432 6 ip_vs_rr,ip_vs_sh,ip_vs_wrr nf_conntrack 133053 1 ip_vs libcrc32c 12644 3 xfs,ip_vs,nf_conntrack
2、配置k8s内核
# 写⼊k8s所需内核模块 [root@k8s-master ~]# vim /etc/sysctl.d/k8s.conf net.bridge.bridge-nf-call-iptables = 1 # 控制⽹络桥接与iptables之间的⽹络转发⾏为 net.bridge.bridge-nf-call-ip6tables = 1 # ⽤于控制⽹络桥接（bridge）的IP6tables过滤规则。当该参数设置为1时，表示启⽤对⽹络桥接的IP6tables过滤规则 fs.may_detach_mounts = 1 # ⽤于控制⽂件系统是否允许分离挂载，1表示允许 net.ipv4.conf.all.route_localnet = 1 # 允许本地⽹络上的路由。设置为1表示允许，设置为0表示禁⽌。 vm.overcommit_memory=1 # 控制内存分配策略。设置为1表示允许内存过量分配，设置为0表示不允许。 vm.panic_on_oom=0 # 决定当系统遇到内存不⾜（OOM）时是否产⽣panic。设置为0表示不产⽣panic，设置为1表示产⽣panic。 fs.inotify.max_user_watches=89100 # inotify可以监视的⽂件和⽬录的最⼤数量。 fs.file-max=52706963 # 系统级别的⽂件描述符的最⼤数量。 fs.nr_open=52706963 # 单个进程可以打开的⽂件描述符的最⼤数量。 net.netfilter.nf_conntrack_max=2310720 # ⽹络连接跟踪表的最⼤⼤⼩。 net.ipv4.tcp_keepalive_time = 600 # TCP保活机制发送探测包的间隔时间（秒）。 net.ipv4.tcp_keepalive_probes = 3 # TCP保活机制发送探测包的最⼤次数。 net.ipv4.tcp_keepalive_intvl =15 # TCP保活机制在发送下⼀个探测包之前等待响应的时间（秒）。 net.ipv4.tcp_max_tw_buckets = 36000 # TCP TIME_WAIT状态的bucket数量。 net.ipv4.tcp_tw_reuse = 1 # 允许重⽤TIME_WAIT套接字。设置为1表示允许，设置为0表示不允许。 net.ipv4.tcp_max_orphans = 327680 # 系统中最⼤的孤套接字数量。 net.ipv4.tcp_orphan_retries = 3 # 系统尝试重新分配孤套接字的次数。 net.ipv4.tcp_syncookies = 1 # ⽤于防⽌SYN洪⽔攻击。设置为1表示启⽤SYN cookies，设置为0表示禁⽤。 net.ipv4.tcp_max_syn_backlog = 16384 # SYN连接请求队列的最⼤⻓度。 net.ipv4.ip_conntrack_max = 65536 # IP连接跟踪表的最⼤⼤⼩。 net.ipv4.tcp_max_syn_backlog = 16384 # 系统中最⼤的监听队列的⻓度。 net.ipv4.tcp_timestamps = 0 # ⽤于关闭TCP时间戳选项。 net.core.somaxconn = 16384 # ⽤于设置系统中最⼤的监听队列的⻓度 # 保存后，所有节点重启，保证重启后内核依然加载 [root@k8s-master ~]# lsmod | grep --color=auto -e ip_vs -e nf_conntrack ip_vs_sh 12688 0 ip_vs_wrr 12697 0 ip_vs_rr 12600 0 ip_vs 141432 6 ip_vs_rr,ip_vs_sh,ip_vs_wrr nf_conntrack 133053 1 ip_vs libcrc32c 12644 3 xfs,ip_vs,nf_conntrack
三、基本组件安装
1、安装 Containerd
1）安装 Docker
# 卸载之前的containerd [root@k8s-master ~]# yum remove -y podman runc containerd # 安装Docker和containerd [root@k8s-master ~]# yum install containerd.io docker-ce dockerce-cli -y
2）配置 Containerd 所需模块
[root@k8s-master ~]# cat <<EOF | sudo tee /etc/modules-load.d/containerd.conf > overlay > br_netfilter > EOF overlay # ⽤于⽀持Overlay⽹络⽂件系统的模块，它可以在现有的⽂件系统之上创建叠加层，以实现虚拟化、隔离和管理等功能。 br_netfilter # ⽤于containerd的⽹络过滤模块，它可以对进出容器的⽹络流量进⾏过滤和管理。 [root@k8s-master ~]# cat /etc/modules-load.d/containerd.conf overlay br_netfilter [root@k8s-master ~]# modprobe -- overlay [root@k8s-master ~]# modprobe -- br_netfilter
3）配置 Containerd 所需内核
[root@k8s-master ~]# vim /etc/sysctl.d/99-kubernetes-cri.conf net.bridge.bridge-nf-call-iptables = 1 # ⽤于控制⽹络桥接是否调⽤iptables进⾏包过滤和转发。 net.ipv4.ip_forward = 1 # 路由转发，1为开启 net.bridge.bridge-nf-call-ip6tables = 1 # 控制是否在桥接接⼝上调⽤IPv6的iptables进⾏数据包过滤和转发。 [root@k8s-master ~]# sysctl --system
4）Containerd 配置⽂件
[root@k8s-master ~]# mkdir -p /etc/containerd # 读取containerd的配置并保存到/etc/containerd/config.toml [root@k8s-master ~]# containerd config default | tee /etc/containerd/config.toml [root@k8s-master ~]# vim /etc/containerd/config.toml # 找到第63行修改为sandbox_image = "registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.9" # 找到containerd.runtimes.runc.options模块，添加SystemdCgroup = false，如果已经存在则直接修改（在第127行） # 添加sandbox_image = "registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.9"（第128行）
# 加载systemctl控制脚本 [root@k8s-master ~]# systemctl daemon-reload # 启动containerd并设置开机启动 [root@k8s-master ~]# systemctl start containerd.service [root@k8s-master ~]# systemctl enable containerd.service Created symlink from /etc/systemd/system/multi-user.target.wants/containerd.service to /usr/lib/systemd/system/containerd.service.
5）配置 crictl 客户端连接的运⾏位置
# 配置容器运⾏环境的crictl.yml⽂件 [root@k8s-master ~]# vim /etc/crictl.yaml runtime-endpoint: unix:///run/containerd/containerd.sock # 指定了容器运⾏时的地址为：unix://... image-endpoint: unix:///run/containerd/containerd.sock # 指定了镜像运⾏时的地址为：unix://... timeout: 10 # 设置了超时时间为10秒 debug: false # 关闭调试模式
2、安装 Kubernetes 组件
# 安装 Kubeadm、Kubelet 和 Kubectl
# 查询最新的Kubernetes版本号
[root@k8s-master ~]# yum list kubeadm.x86_64 --showduplicates | sort -r
# 安装1.28最新版本kubeadm、kubelet和kubectl
[root@k8s-master ~]# yum install kubeadm-1.28* kubelet-1.28* kubectl-1.28* -y
[root@k8s-master ~]# systemctl daemon-reload
# 允许开机⾃启kubelet
[root@k8s-master ~]# systemctl enable --now kubelet
# 查看当前安装的kubeadm版本号
[root@k8s-master ~]# kubeadm version
kubeadm version: &version.Info{Major:"1", Minor:"28", GitVersion:"v1.28.2", GitCommit:"89a4ea3e1e4ddd7f7572286090359983e0387b2f", GitTreeState:"clean", BuildDate:"2023-09-13T09:34:32Z", GoVersion:"go1.20.8", Compiler:"gc", Platform:"linux/amd64"}
3、Kubernetes 集群初始化
1）Kubeadm 配置⽂件
# 修改kubeadm配置⽂件
[root@k8s-master ~]# vim kubeadm-config.yaml
apiVersion: kubeadm.k8s.io/v1beta3
# 指定Kubernetes配置文件的版本，使用的是kubeadm API的v1beta3版本
bootstrapTokens:
# 定义bootstrap tokens的信息。这些tokens用于在Kubernetes集群初始化过程中进行身份验证
- groups:
# 定义了与此token关联的组
- system:bootstrappers:kubeadm:default-node-token
token: 7t2weq.bjbawausm0jaxury
# bootstrap token的值
ttl: 24h0m0s
# token的生存时间，这里设置为24小时
usages:
# 定义token的用途
- signing
# 数字签名
- authentication
# 身份验证
kind: InitConfiguration
# 指定配置对象的类型，InitConfiguration：表示这是一个初始化配置
localAPIEndpoint:
# 定义本地API端点的地址和端口
advertiseAddress: 192.168.15.11
bindPort: 6443
nodeRegistration:
# 定义节点注册时的配置
criSocket: unix:///var/run/containerd/containerd.sock
# 容器运行时(CRI)的套接字路径
name: k8s-master
# 节点的名称
taints:
# 标记
- effect: NoSchedule
# 免调度节点
key: node-role.kubernetes.io/control-plane
# 该节点为控制节点
---
apiServer:
# 定义了API服务器的配置
certSANs:
# 为API服务器指定了附加的证书主体名称(SAN)，指定IP即可
- 192.168.15.11
timeoutForControlPlane: 4m0s
# 控制平面的超时时间，这里设置为4分钟
apiVersion: kubeadm.k8s.io/v1beta3
# 指定API Server版本
certificatesDir: /etc/kubernetes/pki
# 指定了证书的存储目录
clusterName: kubernetes
# 定义了集群的名称为"kubernetes"
controlPlaneEndpoint: 192.168.15.11:6443
# 定义了控制节点的地址和端口
controllerManager: {}
# 控制器管理器的配置，为空表示使用默认配置
etcd:
# 定义了etcd的配置
local:
# 本地etcd实例
dataDir: /var/lib/etcd
# 数据目录
imageRepository: registry.cn-hangzhou.aliyuncs.com/google_containers
# 指定了Kubernetes使用的镜像仓库的地址，阿里云的镜像仓库。
kind: ClusterConfiguration
# 指定了配置对象的类型，ClusterConfiguration：表示这是一个集群配置
kubernetesVersion: v1.28.2
# 指定了kubernetes的版本
networking:
# 定义了kubernetes集群网络设置
dnsDomain: cluster.local
# 定义了集群的DNS域为：cluster.local
podSubnet: 172.16.0.0/16
# 定义了Pod的子网
serviceSubnet: 10.96.0.0/16
# 定义了服务的子网
scheduler: {}
# 使用默认的调度器行为
# 将旧的kubeadm配置⽂件转换为新的格式
[root@k8s-master ~]# kubeadm config migrate --old-config kubeadm-config.yaml --new-config new.yaml
[root@k8s-master ~]# vim new.yaml
# 修改第12行、24行、29行的ip地址为自己本机的ip地址
2）下载组件镜像
# 通过新的配置⽂件new.yaml从指定的阿⾥云仓库拉取kubernetes组件镜像 [root@k8s-master ~]# kubeadm config images pull --config /root/new.yaml [config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver:v1.28.2 [config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager:v1.28.2 [config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler:v1.28.2 [config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:v1.28.2 [config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.9 [config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.5.9-0 [config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:v1.10.1
3）集群初始化
[root@k8s-master ~]# kubeadm init --config /root/new.yaml --upload-certs # 等待初始化后保存这些命令 # 当需要加⼊新node节点时，只复制这执行即可 [root@k8s-master ~]# vim token.txt kubeadm join 10.0.0.200:6443 --token 7t2weq.bjbawausm0jaxury --discovery-token-ca-cert-hash sha256:92191cb8741805ac561c5781d936f60a44a3233740209abf6e64738bfecd4c5e # 当需要⾼可⽤master集群时，将整个token复制下来 --control-plane --certificate-key f9984be15f98141b212efa176c7a49fcda982888f8869b7cc668e661982cbcc0
4）初始化错误解决
错误信息显示本机内存不够，cpu数量不够，我们现在将本机内存提到4个G，cpu数量提到4个 注意要关闭本主机然后进行修改主机配置的操作
[root@k8s-master ~]# kubeadm init --config /root/new.yaml --upload-certs
错误信息显示需要修改配置文件/proc/sys/net/ipv4/ip_forward [root@k8s-master ~]# echo 1 > /proc/sys/net/ipv4/ip_forward [root@k8s-master ~]# kubeadm init --config /root/new.yaml --upload-certs
# 检查kubelet为运行状态 [root@master ~]# systemctl status kubelet Active: active (running) since 五 2024-09-06 17:33:30 CST; 5min ago # 可能是配置文件的地址没有改，所以找不到主机，所以超时 [root@k8s-master ~]# vim new.yaml # 修改第12行、24行、29行的ip地址为自己本机的ip地址 # 初始化重置 [root@k8s-master ~]# kubeadm reset -f ; ipvsadm --clear ; rm -rf ~/.kube [root@k8s-master ~]# kubeadm init --config /root/new.yaml --upload-certs
5）加载环境变量
[root@k8s-master ~]# vim /root/.bashrc export KUBECONFIG=/etc/kubernetes/admin.conf [root@k8s-master ~]# source /root/.bashrc
6）查看组件容器状态
之前采⽤初始化安装⽅式，所有的系统组件均以容器的⽅式运⾏ 并且在 kube-system 命名空间内，此时可以查看 Pod（容器 组）状态
[root@k8s-master ~]# kubectl get po -n kube-system NAME READY STATUS RESTARTS AGE coredns-6554b8b87f-2jslr 0/1 Pending 0 10m coredns-6554b8b87f-mmgbd 0/1 Pending 0 10m etcd-k8s-master 1/1 Running 0 10m kube-apiserver-k8s-master 1/1 Running 0 10m kube-controller-manager-k8s-master 1/1 Running 3 10m kube-proxy-tvk64 1/1 Running 0 10m kube-scheduler-k8s-master 1/1 Running 3 10m # kubectl：k8s控制命令 # get：获取参数 # po：pod缩写 # -n：指定命名空间 # kube-system：命名空间
4、Token 过期处理
注意：以下步骤是上述初始化命令产⽣的 Token 过期了才需要执 ⾏以下步骤，如果没有过期不需要执⾏，直接 join 即可。
Token 过期后⽣成新的 token
kubeadm token create --print-join-command
Master 需要⽣成 --certificate-key：
kubeadm init phase upload-certs --upload-certs
5、Node 节点配置
Node 节点上主要部署公司的⼀些业务应⽤，⽣产环境中不建议 Master 节点部署系统组件之外的其他 Pod，测试环境可以允许 Master 节点部署 Pod 以节省系统资源。
1）查看集群信息
[root@k8s-master ~]# kubectl get node NAME STATUS ROLES AGE VERSION k8s-master NotReady control-plane 25s v1.28.2
2）node 结点基础环境配置
[root@node01 ~]# systemctl stop firewalld [root@node01 ~]# systemctl disable firewalld Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service. Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service. [root@node01 ~]# setenforce 0 [root@node01 ~]# sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/sysconfig/selinux [root@node01 ~]# sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/selinux/config [root@node01 ~]# vim /etc/hosts [root@node01 ~]# ls /etc/yum.repos.d/ CentOS-Base.repo epel.repo hh.repo repo.tar.gz docker-ce.repo epel-testing.repo kubernetes.repo [root@node01 ~]# yum clean all && yum makecache [root@node01 ~]# yum -y install ntpdate [root@node01 ~]# ntpdate time2.aliyun.com [root@node01 ~]# crontab -e * 5 * * * /usr/sbin/ntpdate time2.aliyun.com [root@node01 ~]# ulimit -SHn 65535 [root@k8s-master ~]# scp /etc/security/limits.conf root@10.0.0.250:/etc/security/limits.conf [root@node01 ~]# vim /etc/security/limits.conf [root@k8s-master ~]# scp /etc/sysctl.d/k8s.conf root@10.0.0.250:/etc/sysctl.d/k8s.con [root@node01 ~]# vim /etc/sysctl.d/k8s.conf [root@node01 ~]# yum install docker-ce docker-ce-cli containerd.io -y [root@node01 ~]# yum install wget jq psmisc vim net-tools telnet yum-utils device-mapper-persistent-data lvm2 git -y [root@k8s-master ~]# scp /etc/modules-load.d/containerd.conf root@10.0.0.250:/etc/modules-load.d/containerd.conf [root@node01 ~]# vim /etc/modules-load.d/containerd.conf [root@node01 ~]# modprobe -- br_netfilter [root@node01 ~]# modprobe -- overlay [root@k8s-master ~]# scp /etc/sysctl.d/99-kubernetes-cri.conf root@10.0.0.250:/etc/sysctl.d/99-kubernetes-cri.conf [root@node01 ~]# vim /etc/sysctl.d/99-kubernetes-cri.conf [root@node01 ~]# sysctl --system [root@k8s-master ~]# scp /etc/containerd/config.toml root@10.0.0.250:/etc/containerd/config.toml [root@node01 ~]# vim /etc/containerd/config.toml [root@node01 ~]# systemctl enable --now containerd [root@node01 ~]# cat > /etc/crictl.yaml <<EOF > runtime-endpoint: unix:///run/containerd/containerd.sock > image-endpoint: unix:///run/containerd/containerd.sock > timeout: 10 > debug: false > EOF root@node01 ~]# systemctl status containerd Active: active (running) since 五 2024-09-06 21:41:46 CST; 2min 13s ago [root@node01 ~]# yum install kubeadm-1.28* kubelet-1.28* kubectl-1.28* -y [root@node01 ~]# systemctl daemon-reload [root@node01 ~]# systemctl enable --now kubelet [root@node01 ~]# systemctl status kubelet
# node01通过复制master初始化⽣成的token来加⼊集群 [root@node01 ~]# kubeadm join 10.0.0.200:6443 --token 7t2weq.bjbawausm0jaxury --discovery-token-ca-cert-hash sha256:92191cb8741805ac561c5781d936f60a44a3233740209abf6e64738bfecd4c5e
[root@node01 ~]# swapoff -a && sysctl -w vm.swappiness=0 [root@node01 ~]# echo 1 > /proc/sys/net/ipv4/ip_forward
[root@k8s-master ~]# kubeadm token create --print-join-command kubeadm join 10.0.0.200:6443 --token mwq6bb.h4eqdzp5vjyhe4iy --discovery-token-ca-cert-hash sha256:92191cb8741805ac561c5781d936f60a44a3233740209abf6e64738bfecd4c5e [root@node01 ~]# kubeadm join 10.0.0.200:6443 --token mwq6bb.h4eqdzp5vjyhe4iy --discovery-token-ca-cert-hash sha256:92191cb8741805ac561c5781d936f60a44a3233740209abf6e64738bfecd4c5e
[root@k8s-master ~]# kubectl get node NAME STATUS ROLES AGE VERSION k8s-master NotReady control-plane 24h v1.28.2 node01 NotReady <none> 68s v1.28.2
3）查看集群状态
master 上查看集群状态（NotReady 不影响）
# 获取所有节点信息 [root@k8s-master ~]# kubectl get node NAME STATUS ROLES AGE VERSION k8s-master NotReady control-plane 24h v1.28.2 node01 NotReady <none> 68s v1.28.2
到此建议打快照
6、Calico 组件安装
1）切换 git 分⽀
[root@k8s-master ~]# cd k8s-ha-install/ [root@k8s-master k8s-ha-install]# ls calico.yaml krm.yaml LICENSE metrics-server-0.3.7 metrics-server-3.6.1 README.md [root@k8s-master k8s-ha-install]# git checkout manual-installation-v1.28.x 分支 manual-installation-v1.28.x 设置为跟踪来自 origin 的远程分支 manual-installation-v1.28.x。 切换到一个新分支 'manual-installation-v1.28.x'
2）修改 Pod ⽹段
[root@k8s-master k8s-ha-install]# cd calico/
# 获取已定义的Pod⽹段
[root@k8s-master calico]# POD_SUBNET=`cat /etc/kubernetes/manifests/kube-controller-manager.yaml | grep cluster-cidr= | awk -F= '{print $NF}'`
[root@k8s-master calico]# echo $POD_SUBNET
172.16.0.0/16
# 修改calico.yml⽂件中的pod⽹段
[root@k8s-master calico]# sed -i "s#POD_CIDR#${POD_SUBNET}#g" calico.yaml
# 创建calico的pod
[root@k8s-master calico]# kubectl apply -f calico.yaml
3）查看容器和节点状态
[root@k8s-master calico]# kubectl get po -n kube-system
[root@k8s-master calico]# kubectl get node NAME STATUS ROLES AGE VERSION k8s-master NotReady control-plane 24h v1.28.2 node01 NotReady <none> 20m v1.28.2 [root@k8s-master calico]# kubectl describe po -n kube-system calico